LPC2368FET100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 512 kB flash, 58 kB SRAM, Ethernet, USB 2.0 Device, CAN, SD/MMC, and 10-bit ADC.
Brownout detect with separate thresholds for interrupt and forced reset
On-chip power-on reset
On-chip crystal oscillator with an operating range of 1 MHz to 24 MHz
4 MHz internal RC oscillator trimmed to 1 % accuracy
On-chip PLL
Monday, November 19, 2012
LPC2368FBD100 codes reading
LPC2368FBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 512 kB flash, 58 kB SRAM, Ethernet, USB 2.0 Device, CAN, SD/MMC, and 10-bit ADC
Processor wake-up from Power-down mode via any interrupt
Two independent power domains allow fine tuning of power consumption
Each peripheral has its own clock divider for further power saving
ARM7 with 512 kB flash, 58 kB SRAM, Ethernet, USB 2.0 Device, CAN, SD/MMC, and 10-bit ADC
Processor wake-up from Power-down mode via any interrupt
Two independent power domains allow fine tuning of power consumption
Each peripheral has its own clock divider for further power saving
LPC2367FBD100 codes reading
LPC2367FBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 512 kB flash, 58 kB SRAM, Ethernet and 10-bit ADC.
Emulation trace module supports real-time trace
Single 3.3 V power supply (3.0 V to 3.6 V)
Four reduced power modes: idle, sleep, power-down, and deep power-down
Four external interrupt inputs configurable as edge/level sensitive
ARM7 with 512 kB flash, 58 kB SRAM, Ethernet and 10-bit ADC.
Emulation trace module supports real-time trace
Single 3.3 V power supply (3.0 V to 3.6 V)
Four reduced power modes: idle, sleep, power-down, and deep power-down
Four external interrupt inputs configurable as edge/level sensitive
LPC2366FBD100 codes reading
LPC2366FBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 256 kB flash, 58 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
Four general purpose timers/counters with a total of 8 capture inputs
One PWM/timer block with support for three-phase motor control
Real-Time Clock (RTC)
2 kB SRAM powered from the RTC power pin
WatchDog Timer (WDT).
Standard ARM test/debug interface for compatibility with existing tools
ARM7 with 256 kB flash, 58 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
Four general purpose timers/counters with a total of 8 capture inputs
One PWM/timer block with support for three-phase motor control
Real-Time Clock (RTC)
2 kB SRAM powered from the RTC power pin
WatchDog Timer (WDT).
Standard ARM test/debug interface for compatibility with existing tools
LPC2365FBD100 codes reading
LPC2365FBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 256 kB flash, 58 kB SRAM, Ethernet and 10-bit ADC
Three I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
70 general purpose I/O pins with configurable pull-up/down resistors
10-bit ADC with input multiplexing among 6 pins
10-bit DAC
ARM7 with 256 kB flash, 58 kB SRAM, Ethernet and 10-bit ADC
Three I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
70 general purpose I/O pins with configurable pull-up/down resistors
10-bit ADC with input multiplexing among 6 pins
10-bit DAC
LPC2364HBD100 codes reading
LPC2364HBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
Dual Advanced High-performance Bus (AHB) system
Advanced Vectored Interrupt Controller (VIC)
General Purpose DMA controller (GPDMA) on AHB
Ethernet MAC with associated DMA controller
Four UARTs with fractional baud rate generation
USB 2.0 full-speed device with on-chip PHY
CAN controller with two channels
SPI controller
Two SSP controllers, with FIFO and multi-protocol capabilities.
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
Dual Advanced High-performance Bus (AHB) system
Advanced Vectored Interrupt Controller (VIC)
General Purpose DMA controller (GPDMA) on AHB
Ethernet MAC with associated DMA controller
Four UARTs with fractional baud rate generation
USB 2.0 full-speed device with on-chip PHY
CAN controller with two channels
SPI controller
Two SSP controllers, with FIFO and multi-protocol capabilities.
LPC2364FET100 codes reading
LPC2364FET100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
ARM7TDMI-S processor, running at up to 72 MHz
Up to 128 kB on-chip flash program memory with In-System Programming (ISP)
8 kB of SRAM on the ARM local bus for high performance CPU access
8 kB SRAM for general purpose DMA use also accessible by the USB
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
ARM7TDMI-S processor, running at up to 72 MHz
Up to 128 kB on-chip flash program memory with In-System Programming (ISP)
8 kB of SRAM on the ARM local bus for high performance CPU access
8 kB SRAM for general purpose DMA use also accessible by the USB
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM
LPC2364FBD100 codes reading
LPC2364FBD100 codes reading, arm crack, NXP arm chip decrypt, NXP arm code extraction, PCB cloning.
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
The LPC2364FBD100 is a ARM7 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz. Features include up to 128 kB of flash memory, up to 34 kB of RAM, Ethernet MAC, USB Device/Host/OTG, DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC23xx are pin-compatible to the LPC176x Cortex-M3 series.
ARM7 with 128 kB flash, 34 kB SRAM, Ethernet, USB 2.0 Device, CAN, and 10-bit ADC.
The LPC2364FBD100 is a ARM7 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72 MHz. Features include up to 128 kB of flash memory, up to 34 kB of RAM, Ethernet MAC, USB Device/Host/OTG, DMA controller, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power Real-Time Clock with separate battery supply, and up to 70 general purpose I/O pins. The LPC23xx are pin-compatible to the LPC176x Cortex-M3 series.
Thursday, October 25, 2012
CY8C20224-12LKXI Designing with PSoC Designer
CY8C20224-12LKXI Designing with PSoC Designer
The development process for the PSoC device differs from that
of a traditional fixed-function microprocessor. The configurable
analog and digital hardware blocks give the PSoC architecture a
unique flexibility that pays dividends in managing specification
change during development and lowering inventory costs. These
configurable resources, called PSoC blocks, have the ability to
implement a wide variety of user-selectable functions. The PSoC
development process is:
1. Select user modules.
2. Configure user modules.
3. Organize and connect.
4. Generate, verify, and debug.
Select User Modules
PSoC Designer provides a library of prebuilt, pretested hardware
peripheral components called “user modules.” User modules
make selecting and implementing peripheral devices, both
analog and digital, simple.
Configure User Modules
Each user module that you select establishes the basic register
settings that implement the selected function. They also provide
parameters and properties that allow you to tailor their precise
configuration to your particular application. For example, a Pulse
Width Modulator (PWM) User Module configures one or more
digital PSoC blocks, one for each eight bits of resolution. Using
these parameters, you can establish the pulse width and duty
cycle. Configure the parameters and properties to correspond to
your chosen application. Enter values directly or by selecting
values from drop-down menus. All of the user modules are
documented in datasheets that may be viewed directly in
PSoC Designer or on the Cypress website. These user module
data sheets explain the internal operation of the user module and
provide performance specifications. Each datasheet describes
the use of each user module parameter, and other information
that you may need to successfully implement your design.
Organize and Connect
Build signal chains at the chip level by interconnecting user
modules to each other and the I/O pins. Perform the selection,
configuration, and routing so that you have complete control over
all on-chip resources.
Generate, Verify, and Debug
When you are ready to test the hardware configuration or move
on to developing code for the project, perform the “Generate
Configuration Files” step. This causes PSoC Designer to
generate source code that automatically configures the device to
your specification and provides the software for the system. The
generated code provides APIs with high-level functions to control
and respond to hardware events at run time, and interrupt
service routines that you can adapt as needed.
A complete code development environment allows you to
develop and customize your applications in C, assembly
language, or both.
The last step in the development process takes place inside
PSoC Designer's Debugger (accessed by clicking the Connect
icon). PSoC Designer downloads the HEX image to the ICE
where it runs at full speed. PSoC Designer debugging capabilities rival those of systems costing many times more. In addition
to traditional single-step, run-to-breakpoint, and watch-variable
features, the debug interface provides a large trace buffer. It
allows you to define complex breakpoint events that include
monitoring address and data bus values, memory locations, and
external signals
The development process for the PSoC device differs from that
of a traditional fixed-function microprocessor. The configurable
analog and digital hardware blocks give the PSoC architecture a
unique flexibility that pays dividends in managing specification
change during development and lowering inventory costs. These
configurable resources, called PSoC blocks, have the ability to
implement a wide variety of user-selectable functions. The PSoC
development process is:
1. Select user modules.
2. Configure user modules.
3. Organize and connect.
4. Generate, verify, and debug.
Select User Modules
PSoC Designer provides a library of prebuilt, pretested hardware
peripheral components called “user modules.” User modules
make selecting and implementing peripheral devices, both
analog and digital, simple.
Configure User Modules
Each user module that you select establishes the basic register
settings that implement the selected function. They also provide
parameters and properties that allow you to tailor their precise
configuration to your particular application. For example, a Pulse
Width Modulator (PWM) User Module configures one or more
digital PSoC blocks, one for each eight bits of resolution. Using
these parameters, you can establish the pulse width and duty
cycle. Configure the parameters and properties to correspond to
your chosen application. Enter values directly or by selecting
values from drop-down menus. All of the user modules are
documented in datasheets that may be viewed directly in
PSoC Designer or on the Cypress website. These user module
data sheets explain the internal operation of the user module and
provide performance specifications. Each datasheet describes
the use of each user module parameter, and other information
that you may need to successfully implement your design.
Organize and Connect
Build signal chains at the chip level by interconnecting user
modules to each other and the I/O pins. Perform the selection,
configuration, and routing so that you have complete control over
all on-chip resources.
Generate, Verify, and Debug
When you are ready to test the hardware configuration or move
on to developing code for the project, perform the “Generate
Configuration Files” step. This causes PSoC Designer to
generate source code that automatically configures the device to
your specification and provides the software for the system. The
generated code provides APIs with high-level functions to control
and respond to hardware events at run time, and interrupt
service routines that you can adapt as needed.
A complete code development environment allows you to
develop and customize your applications in C, assembly
language, or both.
The last step in the development process takes place inside
PSoC Designer's Debugger (accessed by clicking the Connect
icon). PSoC Designer downloads the HEX image to the ICE
where it runs at full speed. PSoC Designer debugging capabilities rival those of systems costing many times more. In addition
to traditional single-step, run-to-breakpoint, and watch-variable
features, the debug interface provides a large trace buffer. It
allows you to define complex breakpoint events that include
monitoring address and data bus values, memory locations, and
external signals
CY8C20224-12LKXI Development Tools
CY8C20224-12LKXI Development Tools
PSoC Designer? is the revolutionary Integrated Design
Environment (IDE) that you can use to customize PSoC to meet
your specific application requirements. PSoC Designer software
accelerates system design and time to market. Develop your
applications using a library of precharacterized analog and digital
peripherals (called user modules) in a drag-and-drop design
environment. Then, customize your design by leveraging the
dynamically generated application programming interface (API)
libraries of code. Finally, debug and test your designs with the
integrated debug environment, including in-circuit emulation and
standard software debug features. PSoC Designer includes:
■ Application editor graphical user interface (GUI) for device and
user module configuration and dynamic reconfiguration
■ Extensive user module catalog
■ Integrated source-code editor (C and assembly)
■ Free C compiler with no size restrictions or time limits
■ Built-in debugger
■ In-circuit emulation
■ Built-in support for communication interfaces:
? Hardware and software I
2
C slaves and masters
? Full-speed USB 2.0
? Up to four full-duplex universal asynchronous receiver/transmitters (UARTs), SPI master and slave, and wireless
PSoC Designer supports the entire library of PSoC 1 devices and
runs on Windows XP, Windows Vista, and Windows 7.
PSoC Designer Software Subsystems
Design Entry
In the chip-level view, choose a base device to work with. Then
select different onboard analog and digital components that use
the PSoC blocks, which are called user modules. Examples of
user modules are analog-to-digital converters (ADCs),
digital-to-analog converters (DACs), amplifiers, and filters.
Configure the user modules for your chosen application and
connect them to each other and to the proper pins. Then
generate your project. This prepopulates your project with APIs
and libraries that you can use to program your application.
The tool also supports easy development of multiple configurations and dynamic reconfiguration. Dynamic reconfiguration
makes it possible to change configurations at run time. In
essence, this allows you to use more than 100 percent of PSoC's
resources for a given application.
Code Generation Tools
The code generation tools work seamlessly within the
PSoC Designer interface and have been tested with a full range
of debugging tools. You can develop your design in C, assembly,
or a combination of the two.
Assemblers. The assemblers allow you to merge assembly
code seamlessly with C code. Link libraries automatically use
absolute addressing or are compiled in relative mode, and linked
with other software modules to get absolute addressing.
C Language Compilers. C language compilers are available
that support the PSoC family of devices. The products allow you
to create complete C programs for the PSoC family devices. The
optimizing C compilers provide all of the features of C, tailored
to the PSoC architecture. They come complete with embedded
libraries providing port and bus operations, standard keypad and
display support, and extended math functionality.
Debugger
PSoC Designer has a debug environment that provides
hardware in-circuit emulation, allowing you to test the program in
a physical system while providing an internal view of the PSoC
device. Debugger commands allow you to read and program and
read and write data memory, and read and write I/O registers.
You can read and write CPU registers, set and clear breakpoints,
and provide program run, halt, and step control. The debugger
also allows you to create a trace buffer of registers and memory
locations of interest.
Online Help System
The online help system displays online, context-sensitive help.
Designed for procedural and quick reference, each functional
subsystem has its own context-sensitive help. This system also
provides tutorials and links to FAQs and an Online Support
Forum to aid the designer.
In-Circuit Emulator
A low-cost, high-functionality In-Circuit Emulator (ICE) is
available for development support. This hardware can program
single devices.
The emulator consists of a base unit that connects to the PC
using a USB port. The base unit is universal and operates with
all PSoC devices. Emulation pods for each device family are
available separately. The emulation pod takes the place of the
PSoC device in the target board and performs full-speed
(24-MHz) operation.
PSoC Designer? is the revolutionary Integrated Design
Environment (IDE) that you can use to customize PSoC to meet
your specific application requirements. PSoC Designer software
accelerates system design and time to market. Develop your
applications using a library of precharacterized analog and digital
peripherals (called user modules) in a drag-and-drop design
environment. Then, customize your design by leveraging the
dynamically generated application programming interface (API)
libraries of code. Finally, debug and test your designs with the
integrated debug environment, including in-circuit emulation and
standard software debug features. PSoC Designer includes:
■ Application editor graphical user interface (GUI) for device and
user module configuration and dynamic reconfiguration
■ Extensive user module catalog
■ Integrated source-code editor (C and assembly)
■ Free C compiler with no size restrictions or time limits
■ Built-in debugger
■ In-circuit emulation
■ Built-in support for communication interfaces:
? Hardware and software I
2
C slaves and masters
? Full-speed USB 2.0
? Up to four full-duplex universal asynchronous receiver/transmitters (UARTs), SPI master and slave, and wireless
PSoC Designer supports the entire library of PSoC 1 devices and
runs on Windows XP, Windows Vista, and Windows 7.
PSoC Designer Software Subsystems
Design Entry
In the chip-level view, choose a base device to work with. Then
select different onboard analog and digital components that use
the PSoC blocks, which are called user modules. Examples of
user modules are analog-to-digital converters (ADCs),
digital-to-analog converters (DACs), amplifiers, and filters.
Configure the user modules for your chosen application and
connect them to each other and to the proper pins. Then
generate your project. This prepopulates your project with APIs
and libraries that you can use to program your application.
The tool also supports easy development of multiple configurations and dynamic reconfiguration. Dynamic reconfiguration
makes it possible to change configurations at run time. In
essence, this allows you to use more than 100 percent of PSoC's
resources for a given application.
Code Generation Tools
The code generation tools work seamlessly within the
PSoC Designer interface and have been tested with a full range
of debugging tools. You can develop your design in C, assembly,
or a combination of the two.
Assemblers. The assemblers allow you to merge assembly
code seamlessly with C code. Link libraries automatically use
absolute addressing or are compiled in relative mode, and linked
with other software modules to get absolute addressing.
C Language Compilers. C language compilers are available
that support the PSoC family of devices. The products allow you
to create complete C programs for the PSoC family devices. The
optimizing C compilers provide all of the features of C, tailored
to the PSoC architecture. They come complete with embedded
libraries providing port and bus operations, standard keypad and
display support, and extended math functionality.
Debugger
PSoC Designer has a debug environment that provides
hardware in-circuit emulation, allowing you to test the program in
a physical system while providing an internal view of the PSoC
device. Debugger commands allow you to read and program and
read and write data memory, and read and write I/O registers.
You can read and write CPU registers, set and clear breakpoints,
and provide program run, halt, and step control. The debugger
also allows you to create a trace buffer of registers and memory
locations of interest.
Online Help System
The online help system displays online, context-sensitive help.
Designed for procedural and quick reference, each functional
subsystem has its own context-sensitive help. This system also
provides tutorials and links to FAQs and an Online Support
Forum to aid the designer.
In-Circuit Emulator
A low-cost, high-functionality In-Circuit Emulator (ICE) is
available for development support. This hardware can program
single devices.
The emulator consists of a base unit that connects to the PC
using a USB port. The base unit is universal and operates with
all PSoC devices. Emulation pods for each device family are
available separately. The emulation pod takes the place of the
PSoC device in the target board and performs full-speed
(24-MHz) operation.
Thursday, October 18, 2012
CY7C1041CV33-10BAXE code extraction
CY7C1041CV33-10BAXE code extraction, chip decryption, mcu
crack, dsp crack .
Features
Temperature ranges
Automotive-A: –40 °C to 85 °C
Automotive-E: –40 °C to 125 °C
Pin and function compatible with CY7C1041BNV33
High speed
tAA = 10 ns (Automotive-A)
tAA = 10 ns (Automotive-E)
Low active power
432 mW (max)
Automatic power down when deselected
TTL-compatible inputs and outputs
Easy memory expansion with CE and OE features
Available in Pb-free and non Pb-free 44-pin 400 Mil SOJ, 44-pin
TSOP II and 48-ball FBGA packages
crack, dsp crack .
Features
Temperature ranges
Automotive-A: –40 °C to 85 °C
Automotive-E: –40 °C to 125 °C
Pin and function compatible with CY7C1041BNV33
High speed
tAA = 10 ns (Automotive-A)
tAA = 10 ns (Automotive-E)
Low active power
432 mW (max)
Automatic power down when deselected
TTL-compatible inputs and outputs
Easy memory expansion with CE and OE features
Available in Pb-free and non Pb-free 44-pin 400 Mil SOJ, 44-pin
TSOP II and 48-ball FBGA packages
Tuesday, October 16, 2012
CY7C006A-20AXI chip decryption
CY7C006A-20AXI chip decryption,cypress MCU code extraction, PCB cloning .
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 85
Organization (X x Y) 16Kb x 8
Temp. Classification Industrial
Speed (ns) 20
Min. Operating Temp. (°C) -40
CY7C006A-20JXCT
CY7C006A-20AXC
CY7C006A-20JXC
CY7C006A-20AXCT
CY7C006A-WW14
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 85
Organization (X x Y) 16Kb x 8
Temp. Classification Industrial
Speed (ns) 20
Min. Operating Temp. (°C) -40
CY7C006A-20JXCT
CY7C006A-20AXC
CY7C006A-20JXC
CY7C006A-20AXCT
CY7C006A-WW14
CY7C006A-20AXCT chip decryption
CY7C006A-20AXCT chip decryption,cypress MCU code extraction, PCB cloning .
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 70
Organization (X x Y) 16Kb x 8
Temp. Classification Commercial
Speed (ns) 20
Min. Operating Temp. (°C) 0
CY7C006A-20JXCT
CY7C006A-20AXC
CY7C006A-20JXC
CY7C006A-20AXI
CY7C006A-WW14
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 70
Organization (X x Y) 16Kb x 8
Temp. Classification Commercial
Speed (ns) 20
Min. Operating Temp. (°C) 0
CY7C006A-20JXCT
CY7C006A-20AXC
CY7C006A-20JXC
CY7C006A-20AXI
CY7C006A-WW14
CY7C006A-20AXCKG chip decryption
CY7C006A-20AXCKG chip decryption,cypress MCU code extraction, PCB cloning .
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 70
Organization (X x Y) 16Kb x 8
Temp. Classification Commercial
Speed (ns) 20
Min. Operating Temp. (°C) 0
CY7C006A-20AXC chip decryption
CY7C006A-20AXC chip decryption,cypress MCU code extraction, PCB cloning .
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 70
Organization (X x Y) 16Kb x 8
Temp. Classification Commercial
Speed (ns) 20
Min. Operating Temp. (°C) 0
Related Products
CY7C006A-20JXCT
CY7C006A-20JXC
CY7C006A-20AXCT
CY7C006A-20AXI
CY7C006A-WW14
Automotive Qualified N
Min. Operating Voltage (V) 4.50
Max. Operating Voltage (V) 5.50
Density (Kb) 128
Max. Operating Temp. (°C) 70
Organization (X x Y) 16Kb x 8
Temp. Classification Commercial
Speed (ns) 20
Min. Operating Temp. (°C) 0
Related Products
CY7C006A-20JXCT
CY7C006A-20JXC
CY7C006A-20AXCT
CY7C006A-20AXI
CY7C006A-WW14
CY7C026A MCU Code Reading
CY7C026A MCU Code Reading, Programm Reading, MCU Crack, Chip
Decryption.
Features
True dual-ported memory cells that allow simultaneous access
of the same memory location
16K x 16 organization (CY7C026A)
0.35 micron CMOS for optimum speed and power
High speed access: 15, and 20 ns
Low operating power
Active: ICC = 180 mA (typical)
Standby: ISB3
= 0.05 mA (typical)
Fully asynchronous operation
Automatic power-down
Expandable data bus to 32 bits or more using Master/Slave
chip select when using more than one device
On-chip arbitration logic
Semaphores included to permit software handshaking
between ports
INT flags for port-to-port communication
Separate upper-byte and lower-byte control
Pin select for Master or Slave
Commercial and Industrial temperature ranges
Available in 100-pin thin quad plastic flatpack (TQFP)
Pb-free packages available
Decryption.
Features
True dual-ported memory cells that allow simultaneous access
of the same memory location
16K x 16 organization (CY7C026A)
0.35 micron CMOS for optimum speed and power
High speed access: 15, and 20 ns
Low operating power
Active: ICC = 180 mA (typical)
Standby: ISB3
= 0.05 mA (typical)
Fully asynchronous operation
Automatic power-down
Expandable data bus to 32 bits or more using Master/Slave
chip select when using more than one device
On-chip arbitration logic
Semaphores included to permit software handshaking
between ports
INT flags for port-to-port communication
Separate upper-byte and lower-byte control
Pin select for Master or Slave
Commercial and Industrial temperature ranges
Available in 100-pin thin quad plastic flatpack (TQFP)
Pb-free packages available
Tuesday, September 18, 2012
PIC12F752 MCU Code Extraction
PIC12F752 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Flash Program Memory with self read/write capability
Mid-Range Core, Internal 8MHz oscillator
2 x High Speed Analog Comparators (20nS)
1 x Capture-Compare-PWM (CCP)
4 x 10-bit Analog-to-Digital Converter (ADC) with voltage
reference,
1 x Dual Range 5-bit Digital-to-Analog Converter (DAC)
Complementary Output Generator (COG): Complementary
Waveforms from selectable sources
Watchdog Timer (WDT)
Power-On/Off-Reset, Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
High Current Source/Sink: 2 pins with 50 mA I/O, 4 pins with
25 mA I/O
Wide Operating Voltage of PIC12F752 variant (2.0V – 5.5V)
High Voltage PIC12HV752 variant (2.0V – user defined) with
internal shunt regulator
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Flash Program Memory with self read/write capability
Mid-Range Core, Internal 8MHz oscillator
2 x High Speed Analog Comparators (20nS)
1 x Capture-Compare-PWM (CCP)
4 x 10-bit Analog-to-Digital Converter (ADC) with voltage
reference,
1 x Dual Range 5-bit Digital-to-Analog Converter (DAC)
Complementary Output Generator (COG): Complementary
Waveforms from selectable sources
Watchdog Timer (WDT)
Power-On/Off-Reset, Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
High Current Source/Sink: 2 pins with 50 mA I/O, 4 pins with
25 mA I/O
Wide Operating Voltage of PIC12F752 variant (2.0V – 5.5V)
High Voltage PIC12HV752 variant (2.0V – user defined) with
internal shunt regulator
PIC12F617 MCU Code Extraction
PIC12F617 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Self Read-Write Flash Program Memory
Internal 4/8MHz oscillator
Comparator with hysterisis (user configurable)
Mid-Range core with 35 Instruction, 8 Stack Levels
25mA Source/Sink current I/O
Two 8-bit Timer (TMR0/TMR2)
One 16-bit Timer (TMR1)
Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
Enhanced Capture Compare PWM (Pulse Width Modulation)
Wide Operating Voltage (2.0V – 5.5V)
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Self Read-Write Flash Program Memory
Internal 4/8MHz oscillator
Comparator with hysterisis (user configurable)
Mid-Range core with 35 Instruction, 8 Stack Levels
25mA Source/Sink current I/O
Two 8-bit Timer (TMR0/TMR2)
One 16-bit Timer (TMR1)
Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
Enhanced Capture Compare PWM (Pulse Width Modulation)
Wide Operating Voltage (2.0V – 5.5V)
PIC12F615 MCU Code Extraction
PIC12F615 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Flash Program Memory
Internal 4/8MHz oscillator
Comparator with hysterisis (user configurable)
Mid-Range core with 35 Instruction, 8 Stack Levels
25mA Source/Sink current I/O
Two 8-bit Timer (TMR0/TMR2)
One 16-bit Timer (TMR1)
Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
Enhanced Capture Compare PWM (Pulse Width Modulation)
Wide Operating Voltage (2.0V – 5.5V)
High Voltage PIC12HV615 variant (2.0V – User Defined) with
internal shunt regulator
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Flash Program Memory
Internal 4/8MHz oscillator
Comparator with hysterisis (user configurable)
Mid-Range core with 35 Instruction, 8 Stack Levels
25mA Source/Sink current I/O
Two 8-bit Timer (TMR0/TMR2)
One 16-bit Timer (TMR1)
Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
Enhanced Capture Compare PWM (Pulse Width Modulation)
Wide Operating Voltage (2.0V – 5.5V)
High Voltage PIC12HV615 variant (2.0V – User Defined) with
internal shunt regulator
PIC12F609 MCU Code Extraction
PIC12F609 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Flash Program Memory
Internal 4/8MHz oscillator
Comparator with hysterisis (user configurable)
Mid-Range core with 35 Instruction, 8 Stack Levels
25mA Source/Sink current I/O
One 8-bit Timer (TMR0)
One 16-bit Timer (TMR1)
Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
Wide Operating Voltage (2.0V – 5.5V)
High Voltage PIC12HV609 variant (2.0V – User Defined) with
internal shunt regulator
Subscribe to:
Posts (Atom)